December 22nd, 2009 | 
Author: 
In the open water splashing sound caused by flowing water or pouring non-stop from the top, falling down and flying into a river. Of course, this natural way is not economical if applied at home. So anyone working in through a pond.
What are the basic principles you need to know, before making a swimming pool?
1. Size
Size 1 m² is enough to make the water fall / fountain, spurting water even waterfalls. So that makes the sound, the distance between the fountain and pond water surface at least 1-1.5 m, with a pool depth of 15-40 cm.
2. Water Pump 3. Bath Filter Without the filter, the pump will often jammed because of the dust particles from decaying leaves of water plants, food remnants, and the fish waste will be trapped in the pump. Unfortunately, the pump stuck in a long time tend to be damaged by heat engines. Present at the Rumah Sizes and prices vary enough. From small to put on the table until a stand-alone and requires an area + 0.75 m². This tool is equipped with a pump, so you only need to pour water container according to the available capacity, plug the power cord to the switch and start enjoying the rhythm of splashing water.
Increasing the pump function of the pond to the point or position has been prepared, and then dropped him from the law of gravity. The faster the water flows, the water splashes and bubbles that happen. Sooner or later the actual water flow can be regulated. More important is the planned altitude.
Clean pool pump caused to function optimally and durable. If you put water plants-even in the container / pot-and a few small fish, should be prepared as a filter / filter.
The sound of water can also be presented in the house on the initiative of a few craftsmen natural stone (sandstone). Splashing water devices available in stores or shops of building materials interior equipment.
Posted in 
Tags: 